Install Boot Disk Backplane
b.
Reconnect the power cable and the data cables [1].
2.
Return the server node to operation.
a.
Re-seat the boot disk drives.
See “Install a Boot Drive” on page 158.
b.
Install the server node top cover.
See “Install Server Node Top Cover” on page 246.
c.
Install the server node into the system.
See “Install Server Node Into System Chassis” on page 247.
d.
Power on the server node.
See “Powering On Oracle Database Appliance Version 1” on page 249.
Servicing the Power Distribution Board (FRU)
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
The Oracle Database Appliance Version 1 power distribution board (PDB) distributes power
from the power supplies to all system components.
The power distribution board is a FRU and can only be replaced by an Oracle-qualified service
technician.
Caution - Equipment damage. Follow antistatic precautions as described in “Performing
Electrostatic Discharge and Antistatic Prevention Measures” on page 146. Do not touch the
components along their connector edges.
Appendix A • Servicing the Oracle Database Appliance Version 1 207
To Next Page
Loading...
Need help?
General