Oracle MICROS 700 Series Setup Guide

Table 1-1 (Cont.) Oracle MICROS Tablet 721P Features
Feature Description
5. Battery charge indicator Use to connect a power supply to provide
power to your tablet and charge the battery.
6. Barcode scanner button Use to activate the barcode scanner.
7. Barcode scanner (optional) Captures and reads information contained in a
bar code.
8. Magnetic Stripe Reader (MSR) Reads the information encoded in the
magnetic stripe of payment cards.
9. Camera (optional) Use to take photographs.
10. Anchor (2x) for safety tether or third-party
shoulder strap
Use to attach a safety tether or shoulder strap.
11. Battery latch Use to unlock and remove the battery.
12. Mounting points (4x) for PIN entry device,
mobile payment location
Use to attach PIN entry device.
13. Battery sensor (located under battery).
Note: Pressing the battery sensor when the
battery is removed disables the hot swap
capability and causes the tablet to shut down.
Senses the presence of a battery. Located in
the battery compartment under the battery.
Inadvertently pressing this when the battery is
removed disables the “hot swap” capability
and causes the tablet to power off.
Tablet 721 Features
Figure 1-2 The Features of the Oracle MICROS Tablet 721 — Front and Side
View
Chapter 1
Tablet 721 Features
1-3

Oracle MICROS 700 Series Specifications

General

Brand	Oracle
Model	MICROS 700 Series
Category	Tablet
Language	English