Oracle Solaris Cluster 3.3 User Manual

TABLE P–3 Solaris I/O multipathing and Sun StorEdge RAID Manager
Title Part Number
Sun StorEdge RAID Manager 6.22.1 Release Notes 805-7758–14
Sun StorEdge RAID Manager 6.22 User's Guide 806-0478-10
Solaris Fibre Channel Storage Conguration and Multipathing Support Guide 819-0139
TABLE P–4 Sun StorEdge A1000 and Netra st A1000 Storage Array
Title Part Number
OpenBoot 2.x Command Reference Manual 806-2906-10
Netra st A1000/D1000 Installation and Maintenance Manual 805-7147
Sun StorEdge A1000 and D1000 Installation, Operations, and Service Manual 805-2624
Sun StorEdge D1000 Storage Guide 805-4013
TABLE P–5 Sun StorEdge A3500 Storage System
Title Part Number
OpenBoot 2.x Command Reference Manual 806-2906-10
Sun StorEdge A3500/A3500FC Hardware Conguration Guide 805-4981
TABLE P–6 Oracle Solaris Cluster and Sun Cluster Documentation
Documentation
Oracle Solaris Cluster 3.3
Sun Cluster 3.2
Sun Cluster 3.1
Using UNIX Commands
This document contains information about commands that are used to install, congure, or
upgrade an Oracle Solaris Cluster conguration. This document might not contain complete
information about basic UNIX commands and procedures such as shutting down the system,
booting the system, and conguring devices.
See one or more of the following sources for this information:
■
Online documentation for the Oracle Solaris Operating System (Oracle Solaris OS)
■
Other software documentation that you received with your system
Preface
7

Oracle Solaris Cluster 3.3 Specifications

General

Brand	Oracle
Model	Solaris Cluster 3.3
Category	Server
Language	English