Need help?Do you have a question about the Oracle SPARC T8-1 and is the answer not in the manual?
Access point for product and related documentation and resources.
Method for providing feedback on the manual's content and usability.
Details the layout, buttons, and LEDs on the server's front panel.
Describes the connectors and components located on the server's rear panel.
Identifies the physical locations of key internal components within the chassis.
Visual representation of component connections and device slot relationships.
Procedures to identify components that require service using diagnostic tools.
Steps to access the Oracle ILOM command line for system diagnostics.
How to use `fmadm faulty` to display system fault information.
Using `show disabled` to list components disabled due to faults or configuration.
Table mapping internal components to their Oracle ILOM targets.
Guide to understanding the meaning of various status LEDs on server components.
Explains the function of front panel buttons and indicator lights.
Details the controls and status indicators found on the server's rear panel.
Methods for diagnosing faults using diagnostic information and log files.
How to use the `dmesg` command to view system diagnostic messages.
Accessing and viewing system log files within the Oracle Solaris OS.
Accessing and viewing event and audit logs through Oracle ILOM.
Description of the Power-On Self-Test (POST) and its diagnostic role.
Steps to configure POST parameters and behavior via Oracle ILOM.
Procedures to manually clear persistent fault records after component replacement.
Essential safety precautions for handling server hardware and performing maintenance.
List of required tools and equipment for server servicing procedures.
Explanation of server fillers and their role in maintaining airflow.
Methods for locating the server's unique serial number for support.
Using server locate indicators to identify a specific unit in a rack.
Classification of components based on service type (hot/cold) and customer replaceability.
Step-by-step instructions for safely powering off the server.
Procedures for gaining physical access to internal server components.
Precautions and steps to protect components from electrostatic discharge.
How to extend the server from the rack for easier component access.
Procedure for releasing the Cable Management Arm (CMA) for access.
Steps to safely remove the server chassis from its rack mounting.
Instructions for safely removing the server's top access cover.
Procedure for opening or removing the internal airflow cover.
Details on how to remove the fan cover for access to fan modules.
Guidance on connecting external devices during service procedures.
Explains the meaning of status LEDs for the server's drives.
Steps to identify a malfunctioning drive before replacement.
Procedure for removing a drive or drive filler from its bay.
Instructions for installing a new drive or filler into the server.
Steps to confirm proper installation and functionality of a drive.
Explains the status indicators for the server's fan modules.
How to identify a faulty fan module using status LEDs.
Step-by-step guide for removing a faulty fan module.
Instructions for installing a replacement fan module.
Procedures to confirm successful replacement of a fan module.
How to identify a faulty power supply using indicator LEDs.
Detailed steps for removing a power supply unit.
Instructions for installing a new power supply unit.
Steps to confirm proper installation and operation of a power supply.
Rules and guidelines for configuring memory risers and DIMMs.
How to verify DIMM compatibility and supported configurations.
Identifies Field Replaceable Unit (FRU) names for memory components.
Procedures for installing additional memory modules into the server.
Step-by-step guide for replacing a malfunctioning DIMM.
Using Oracle ILOM to find faulty DIMMs based on fault data.
Using the DIMM fault indicator button to identify faulty modules.
Detailed steps for removing a memory riser assembly.
Instructions for safely removing a DIMM from its slot.
Step-by-step guide for installing a DIMM into the server.
Procedures for installing a memory riser assembly.
Steps to enable and verify newly installed or replaced DIMMs.
Information on identifying and resolving DIMM configuration issues.
Guidelines for installing PCIe cards in available slots.
Explains the connections of PCIe slots to the I/O root complex.
Step-by-step instructions for removing PCIe cards or fillers.
Procedures for installing PCIe cards or fillers into the server.
Details on how to remove the embedded USB drive.
Instructions for installing a new eUSB drive.
Procedure for replacing the system battery to maintain timekeeping.
Information on SPM firmware, configuration, and compatibility.
Step-by-step guide for removing the Service Processor Module (SPM).
Procedures for installing a new Service Processor Module (SPM).
Steps to confirm the correct installation and operation of the SPM.
Detailed instructions for removing the server's motherboard.
Procedures for installing a new server motherboard.
Steps to reactivate RAID volumes after motherboard replacement.
Procedures to confirm the correct installation of the motherboard.
Step-by-step guide for removing the drive backplane.
Instructions for installing a new drive backplane.
Procedures to confirm the correct installation of the drive backplane.
Details on how to reinstall the fan cover.
Procedures for installing and securing the airflow cover.
Instructions for reinstalling the server's top cover.
Steps to return the server to its rack and operating position.
How to connect the server's power cords.
Procedure to power on the server using the Oracle ILOM interface.
How to power on the server using the front panel power button.
To Next Page
General