Oracle SPARC T8-1 - Open and Remove the Airflow Cover

Open and Remove the Airflow Cover
Related Information
■
“Replace the Top Cover” on page 157
■
“Open and Remove the Airflow Cover” on page 54
■
“Remove the Fan Cover” on page 55
Open and Remove the Airflow Cover
To access some components, you must open or remove the transparent airflow cover.
1.
Lift the edge of the airflow cover closest to the rear of the server.
The airflow cover can stand in its upright position.
Perform the next steps if you need to remove the airflow cover.
54 SPARC T8-1 Server Service Manual • January 2022