Locate the Server
/System
Targets:
. . .
In the output look for a line under Properties that identifies the product serial number. For
example:
product_serial_number = BDL1026F8F
Related Information
■
“Front Panel Components” on page 11
Locate the Server
You can use the Server Locate indicators to identify one particular server from many other
servers.
1.
At the Oracle ILOM prompt, type:
-> set /System/locator_indicator=on
The white Server Locate indicators (one on the front panel and one on the rear panel) blink for
about 30 minutes before turning off.
2.
After locating the server with the blinking Locate indicator, turn it off by pressing
the Server Locator button.
Alternatively, you can type an Oracle ILOM command to turn off the Locate indicator.
-> set /System/locator_indicator=off
Related Information
■
“Front Panel Components” on page 11
Component Service Categories
The server components and assemblies that can be replaced in the field fall into three
categories:
Preparing for Service 43
To Next Page
Loading...
Need help?
General