Tools Needed For Service
attach an antistatic strap to your wrist and then to a metal area on the chassis. Following this
practice equalizes the electrical potentials between you and the server.
Note - An antistatic wrist strap is no longer included in the accessory kit for this server.
However, antistatic wrist straps are still included with options.
Antistatic Mat
Place ESD-sensitive components such as motherboards, memory, and other PCBs on an
antistatic mat.
Related Information
■
“Prevent ESD Damage” on page 49
■
“Tools Needed For Service” on page 41
Tools Needed For Service
You need the following tools for most service operations:
■
Antistatic wrist strap
■
Antistatic mat
■
No. 2 Phillips screwdriver
■
No. 1 flat-blade screwdriver (battery removal)
■
T10 Torx screwdriver
■
T15 Torx screwdriver
■
T20 Torx screwdriver
Related Information
■
“Safety Information” on page 39
■
“Prevent ESD Damage” on page 49
Preparing for Service 41
To Next Page
Loading...
Need help?
General