Oracle SPARC T8-1 - Oracle ILOM Properties that Affect POST Behavior

Configure POST
4.
View the current values for settings.
For example:
-> show /HOST/diag
/HOST/diag
Targets:
Properties:
default_level = off
default_verbosity = normal
error_level = max
error_verbosity = normal
hw_change_level = max
hw_change_verbosity = normal
Commands:
cd
set
show
->
Related Information
■
“POST Overview” on page 34
■
“Oracle ILOM Properties That Affect POST Behavior” on page 36
Oracle ILOM Properties That Affect POST
Behavior
There are a number of Oracle ILOM commands that you can use to perform host diagnostic
tests. For details about using these commands, refer to the chapter that describes configuring
host server management actions in the Oracle ILOM Administrator's Guide for Configuration
and Maintenance Firmware Release 4.0.x.
Related Information
■
“POST Overview” on page 34
■
“Configure POST” on page 34
36 SPARC T8-1 Server Service Manual • January 2022