Install the SPM
b.
Lift the SPM up and away from the motherboard (panel 2).
5.
Install a new SPM.
See “Install the SPM” on page 123.
Related Information
■
“SPM Firmware and Configuration” on page 121
■
“Install the SPM” on page 123
Install the SPM
You can perform this cold-service procedure. The server must be completely powered down
before performing this procedure. See “Component Service Categories” on page 43 for more
information about this category of service procedures.
1.
Remove a defective SPM or remove the SPM you will install in a new
motherboard.
See “Remove the SPM” on page 122.
Servicing the SPM 123
To Next Page
Loading...
