Verify the Motherboard
/pci@303/pci@2/pci@0/pci@4/nvme@0
NVME Controller VID: 8086 SSVID: 108e SN: PHLE7192003G6P4O MN: 7335940:ICDPC2DD2ORA6.4T
FR: QDV1RD06 NN: 1
Namespace ID: 1 Size: 6.401 TB
10.
Set the server to boot the OS when powered on.
ok setenv auto-boot? true
11.
Reboot the server.
See Server Administration, booting and shutting down Oracle Solaris.
Related Information
■
“Install the Motherboard” on page 135
■
“Verify the Motherboard” on page 145
Verify the Motherboard
1.
Use the Oracle ILOM show faulty command to verify that the fault has been
cleared.
See “Identify Faulted Components” on page 23 for more information on using the show faulty
command.
2.
Perform one of the following tasks based on your verification results:
■ If the previous steps did not clear the fault, see “Detecting and Managing
Faults” on page 21 for information about the tools and methods you can use
to diagnose component faults.
■ If the previous steps indicate that no faults have been detected, then the
component has been replaced successfully. No further action is required.
Related Information
■
“Install the Motherboard” on page 135
■
“Reactivate RAID Volumes” on page 142
Servicing the Motherboard 145
To Next Page
Loading...
