Install a Memory Riser
■
“Checking DIMM Compatibility” on page 84
■
“Remove a Memory Riser” on page 91
■
“Remove a DIMM” on page 95
■
“Install a Memory Riser” on page 99
■
“Enable and Verify a DIMM” on page 103
Install a Memory Riser
Caution - This procedure requires handling components that are sensitive to ESD. Follow
antistatic practices to avoid damage or component failure.
The system must be completely powered down before performing this procedure. See
“Component Service Categories” on page 43 for more information about cold-service
procedures.
Perform this procedure to install a memory riser in order to replace a faulty memory riser or
to install a memory riser you removed to access other components, such as the DIMMs on the
motherboard.
1.
Align the memory riser with the four standoffs.
Servicing Memory Risers and DIMMs 99
To Next Page
Loading...
Need help?
General