Preparing for Service
These topics describe how to prepare the server for servicing.
Note - Use only SPARC T8 components in SPARC T8 servers.
Step Description Links
1. Review safety and handling information. “Safety Information” on page 39
2. Gather the tools needed for service. “Tools Needed For Service” on page 41
3. Consider filler options. “Fillers” on page 42
4. Review component service categories. “Component Service Categories” on page 43
5. Find the server serial number. “Find the Server Serial Number” on page 42
6. Identify the server to be serviced. “Locate the Server” on page 43
7. For cold-service operations, shut down the OS and remove
power from the server.
“Removing Power From the Server” on page 45
8. Move the server out of the rack and remove covers as
necessary to gain access to internal components.
“Accessing Server Components” on page 48
9. Attach devices to the server to perform service procedures. “Attachment of Devices During Service” on page 57
Related Information
■
“Identifying Components” on page 11
■
“Returning the Server to Operation” on page 153
Safety Information
For your protection, observe the following safety precautions when setting up your equipment:
■
Follow all cautions and instructions marked on the equipment and described in the
documentation shipped with your server.
Preparing for Service 39
To Next Page
Loading...
Need help?
General