Oracle SPARC T8-1 - Prevent ESD Damage; Extend the Server to the Service Position

Prevent ESD Damage
Prevent ESD Damage
Many components housed within the chassis can be damaged by ESD. To protect these
components from damage, perform the following steps before opening the chassis for service.
1.
Prepare an antistatic surface to set parts on during the removal or installation
process.
Place ESD-sensitive components such as the printed circuit boards on an antistatic mat. The
following items can be used as an antistatic mat:
■
Antistatic bag used to wrap a replacement part
■
ESD mat
■
Disposable ESD mat (shipped with some replacement parts or optional components)
2.
Attach an antistatic wrist strap.
When servicing or removing server components, attach an antistatic strap to your wrist and then
to a metal area on the chassis.
See “Safety Information” on page 39.
Related Information
■
“Safety Information” on page 39
Extend the Server to the Service Position
You can service the following components with the server in the service position:
■
Drives or fillers
■
Power supplies
■
Fans
■
Memory risers
■
DIMMs
■
PCIe cards
■
SPM
■
eUSB drive
■
Battery
Preparing for Service 49