Power Off the Server (Oracle ILOM)
5.
Shut down the Oracle Solaris OS.
Refer to the Oracle Solaris system administration documentation for additional information.
Related Information
■
“Power Off the Server (Server Power Button - Graceful)” on page 47
■
“Power Off the Server (Emergency Shutdown)” on page 47
■
“Front Panel Components” on page 11
Power Off the Server (Oracle ILOM)
You can use the SP to perform a graceful shutdown of the server, and to ensure that all of your
data is saved and the server is ready for restart.
Note - Additional information about powering off the server is provided in “Booting and
Shutting Down Oracle Solaris” in SPARC T8 Series Servers Administration Guide.
1.
Prepare to power off the server.
See “Prepare to Power Off the Server” on page 45.
2.
If you are consoled to the host, switch from the system console to the Oracle
ILOM prompt by typing the #. (Hash-Dot) key sequence.
3.
Power off the server.
-> stop /System
Note - You can also use the Server Power button on the front of the server to initiate
a graceful server shutdown. (See “Power Off the Server (Server Power Button -
Graceful)” on page 47.)
Related Information
■
“Prepare to Power Off the Server” on page 45
■
“Power Off the Server (Server Power Button - Graceful)” on page 47
■
“Power Off the Server (Emergency Shutdown)” on page 47
■
“Front Panel Components” on page 11
46 SPARC T8-1 Server Service Manual • January 2022