Oracle SPARC T8-1 - Install a Fan Module

Install a Fan Module
Caution - When removing a fan module, do not rock it back and forth. Rocking fans can
damage the fan module connectors.
Caution - When changing fan modules, note that only the fan modules can be removed or
replaced. Do not service any other components in the fan compartment unless the server is shut
down and the power cords are removed.
6.
Install a new fan module.
See “Install a Fan Module” on page 73.
Related Information
■
“Determine Which Fan Module Is Faulty” on page 71
■
“Extend the Server to the Service Position” on page 49
■
“Install a Fan Module” on page 73
Install a Fan Module
Caution - To ensure proper cooling, ensure that you install the replacement fan module in the
same slot from which the faulty fan was removed.
1.
Unpack the replacement fan module and place it on an antistatic mat.
2.
Open the fan door.
Servicing Fan Modules 73