Remove a Memory Riser
Note - You must press the button with a few minutes of shutting the system down to ensure
there is enough stored power available to light fault LEDs.
Related Information
■
“Locate a Faulty DIMM (Oracle ILOM)” on page 89
■
“Remove a Memory Riser” on page 91
■
“Remove a DIMM” on page 95
Remove a Memory Riser
Caution - These procedures require that you handle components that are sensitive to ESD.
Follow antistatic practices to avoid damage or component failure.
Servicing Memory Risers and DIMMs 91
To Next Page
Loading...
Need help?
General