12
EN
Technical specifi cations
Power supply: 220 - 240 V~ 50 Hz
Max. power consumption: 395 W (30 °C, rel. humidity 80%)
Rated power consumption: 315 W (27 °C, rel. Humidity 60%)
Rated current load: 1.75 A (27 °C, rel. Humidity 60%)
Max. current load: 2.05 A (30 °C, rel. humidity 80%)
Dehumidifi cation capacity: 12.4 l/day (27 °C, rel. humidity 60%)
25.0 l/day (30 °C, rel. Humidity 80%)
Water tank capacity: 4 l
Noise: ≤ 45 dB (A)
Refrigerant charge (type/volume): R290/70 g
Maximum working pressure at
suction/discharge side: 0.7 MPa / 3.2 MPa
Maximum allowable pressure at
high/low pressure side: 3.2 MPa
Maximum allowable pressure
heat exchanger: 3.2 MPa
Dimensions (W x D x H): 33.5 x 23 x 57 cm
Weight: 14.5 kg
Package Contents: dehumidifi er (1)
instructions for use (1)
The declared noise emission value of this appliance is ≤ 45 dB (A), which
represents the sound power level A with respect to the reference sound power of
1 pW.
We reserve the right to make changes!
Characteristics
The dehumidifi er is used to remove excess moisture from the air. The resulting
reduction in relative humidity protects buildings and their interior from the adverse
effects of excessive humidity.
The ecological preparation R290 is used as a refrigerant. R290 does not have a
detrimental effect on the ozone layer (ODP), has a negligible greenhouse effect
(GWP) and is available worldwide. Due to its effi cient energy properties, R290 gas
is very suitable for this use as a refrigerant. Special safety precautions must be
taken into account due to the high fl ammability of the coolant.
Warning
This device uses fl ammable refrigerant.
If the refrigerant leaks and comes in contact with a fi re or hot object, it will
produce harmful gases and there is a risk of fi re and explosion.
To Next Page
Loading...