Orbitsound T12 - Advanced Setup; Positioning: getting the most from airSOUND

9
Advanced Setup
The orbitsound T12 is easy to set up and enjoy, but even better sound can be
achieved by following these guidelines.
1. Positioning: getting the most from airSOUND
The stereo sound eld is produced by the speakers mounted in the side of the
soundbar. These stereo signals interact with the main signal to produce true stereo
in your listening environment:
Stereo field origin
IMPORTANT: The areas marked need to be clear of obstacles in order for the
airSOUND stereo sound eld to work eectively.
HINT: Because airSOUND produces a uniform stereo sound eld, the soundbar does
not need to be placed directly in front of the listener. Therefore, placing the soundbar
conveniently so that the sides are not obstructed is more important than central
placement, i.e. on low or high shelf, countertop, below/above TV
2. Subwoofer placement:
Subwoofer placement is not as critical as the placement of the soundbar. Position
the subwoofer after optimising placement of the soundbar.
HINT: The sound output from the subwoofer is omni directional, so this can be placed
anywhere. However, try to avoid placing the subwoofer too far from the soundbar as this
can cause a noticeable ‘separation’ eect.
IMPORTANT: Always make sure that the subwoofer’s side with ports (tubes) is
clear from obstruction.