2222
PRECAUTIONS
WHEN PUTTING THE CLEANER INTO THE POOL, THE AIR INSIDE THE CLEANER
SHOULD BE DISCHARGED AS FOLLOW:
PUT INTO OR LIFT OUT OF THE POOL WITH THE CLEANER BOTTOM TOWARDS THE
WALL TO AVOID ANY POSSIBLE SCRATCHES TO THE POOL.
1. Hold the cleaner and submerge it vertically for 5-6 seconds until no bubbles come out
(Fig. 1).
2. Press the switch button to power on and rotate the cleaner 90 degrees.
3. Submerge it horizontally into the pool floor until a large number of bubbles are
discharged from the nozzle (Fig. 2).
OPERATING INSTRUCTION
4
IV. Operating instruction
4.1. Precautions
a. When putting the cleaner into the pool, the air inside the cleaner should be discharged as follow:
① Hold the cleaner and submerge it vertically for 5-6 seconds until no bubbles come out (Fig. 1).
② Press the switch button to power on and rotate the cleaner 90 degrees.
③ Submerge it horizontally into the pool floor until a large number of bubbles are discharged from
the nozzle (Fig. 2).
Fig. 1 Fig. 2
b. Put into or lift out of the pool with the cleaner bottom towards the wall to avoid any possible
scratches to the pool.
C. Please ensure that the top cover of the cleaner is tightly assembled to its chassis.
4
IV. Operating instruction
4.1. Precautions
a. When putting the cleaner into the pool, the air inside the cleaner should be discharged as follow:
① Hold the cleaner and submerge it vertically for 5-6 seconds until no bubbles come out (Fig. 1).
② Press the switch button to power on and rotate the cleaner 90 degrees.
③ Submerge it horizontally into the pool floor until a large number of bubbles are discharged from
the nozzle (Fig. 2).
Fig. 1 Fig. 2
b. Put into or lift out of the pool with the cleaner bottom towards the wall to avoid any possible
scratches to the pool.
C. Please ensure that the top cover of the cleaner is tightly assembled to its chassis.
To Next Page
Loading...
