2323
PLEASE ENSURE THAT THE TOP COVER OF THE CLEANER IS TIGHTLY ASSEMBLED TO
ITS CHASSIS.
WHEN CHARGING, IT IS STRICTLY FORBIDDEN TO FACE THE BOTTOM UP TO
PREVENT THE SWING PLATE FROM BEING CRUSHED.
WHEN FASTENING THE TOP COVER
AND CHASSIS, PLEASE FOCUS ON THE
INSTALLATION DIRECTION AS SHOWN IN
THE BELOW FIGURE: THE ARROW POSITION
NEAR THE BUCKLE OF TOP COVER SHOULD
BE ALIGNED WITH THE HOLE POSITION
NEAR THE BUCKLE OF CHASSIS.
OPERATING INSTRUCTION
5
dd. When fastening the top cover and chassis, please focus more on the installation direction as
shown in the below figure: the arrow position near the buckle of top cover should be aligned with
the hole position near the buckle of chassis.
e. When charging, it is strictly forbidden to face the bottom up to prevent the swing plate from
being crushed.
5
dd. When fastening the top cover and chassis, please focus more on the installation direction as
shown in the below figure: the arrow position near the buckle of top cover should be aligned with
the hole position near the buckle of chassis.
e. When charging, it is strictly forbidden to face the bottom up to prevent the swing plate from
being crushed.
5
dd. When fastening the top cover and chassis, please focus more on the installation direction as
shown in the below figure: the arrow position near the buckle of top cover should be aligned with
the hole position near the buckle of chassis.
e. When charging, it is strictly forbidden to face the bottom up to prevent the swing plate from
being crushed.
To Next Page
Loading...
