39
COMPOSITION DU COFFRET
ASSUREZ-VOUS QUE LE CAPOT SUPÉRIEUR DE L’APPAREIL EST BIEN ASSEMBLÉ
AVEC SON CHÂSSIS.
POSER LE ROBOT SUR SES ROUES LORS DE LA CHARGE, NE JAMAIS LE RETOURNER.
POSITIONNER LE CAPOT SUPÉRIEUR
SUIVANT LA FLÈCHE FACE AU TROU DU
CHÂSSIS POUR L’Y FIXER.
FONCTIONNEMENT DU ROBOT
5
dd. When fastening the top cover and chassis, please focus more on the installation direction as
shown in the below figure: the arrow position near the buckle of top cover should be aligned with
the hole position near the buckle of chassis.
e. When charging, it is strictly forbidden to face the bottom up to prevent the swing plate from
being crushed.
5
dd. When fastening the top cover and chassis, please focus more on the installation direction as
shown in the below figure: the arrow position near the buckle of top cover should be aligned with
the hole position near the buckle of chassis.
e. When charging, it is strictly forbidden to face the bottom up to prevent the swing plate from
being crushed.
5
dd. When fastening the top cover and chassis, please focus more on the installation direction as
shown in the below figure: the arrow position near the buckle of top cover should be aligned with
the hole position near the buckle of chassis.
e. When charging, it is strictly forbidden to face the bottom up to prevent the swing plate from
being crushed.
To Next Page
Loading...
