MAINTENANCE CHART
Ask your dealer to realize this operation needing special tools and knowledge.
Inspection to realize by the owners before starting the engine
Inspection to realize by the owners after starting the engine
Every 300
hours every
year
Clean the machine from flammable
materials
check machine do not move when
lever is on “N”
Check efficiency of the brake
Check for rust, and cracks
Check they are in place and in good
condition
Check they are bolted in their place
and in good condition
Check for leaks and good condition
Replace if needed
Check they are bolted in their place
and in good condition
Blade clutch control
lever
Check the adjustment of the wire
Check they tensioned and in good
condition
To Next Page
Loading...
Need help?
General
