OREC RM83G - Page 21

OREC RM83G - © SAT 03/2015
21
MAINTENANCE CHART
 Ask your dealer to realize this operation needing special tools and knowledge.
⊕ Inspection to realize by the owners before starting the engine
⊗ Inspection to realize by the owners after starting the engine
Part to inspect Inspection
Every
use
first 20
hours
Every les
100
hours
Every 300
hours every
year
Blade belt
Check belt tension


Check wear


HST Transmission
Oil level
⊕
⊕
Oil leak
⊕
⊗
Oil pollution

Fuel
refuelling
⊕
Fuel cock
⊕
Flammables materials Clean the machine from flammables
matérials
⊕
Steering wheel
Horizontal, loosness
⊕
Latéral loosness
⊕
Travel lever check machine do not move when
lever is on “N”
⊗
Check travel lever goes on “N” when
applying brake
⊗
Tyres
Check tires pressure
⊕
Check tires wear
⊕
Brake
Check efficiency of the brake
⊗
Check travel lever goes on “N” when
applying brake
⊗
Chassis
Check for rust, and cracks
Safety stickers Check they are in place and in good
condition
⊕
Safety switches
Check for efficiency
⊗
Guards & shields Check they are bolted in their place
and in good condition
⊕
Ignition key
Check for efficiency
⊗
Tank and fuel hoses Check for leaks and good condition
Replace if needed
⊕
Battery
Check level
⊕
Throttle lever
Check for efficiency
⊗
Blades Check they are bolted in their place
and in good condition
⊕
Blade clutch control
lever
Check the adjustment of the wire ⊕  
Blade brake
Check the adjustment
⊕


Blade belt Check they tensionned and in good
condition
 
Engine
Refer to engine manual