What to do if Oreck Graphite Vacuum Cleaner does not pick up?
If your Oreck Vacuum Cleaner isn't picking up, you should try the following: replace the filter bag, clear any obstructions, replace the belt, and change the bag. If the problem persists, return it to an Oreck Approved Service Centre for repair.
General| Brand | Oreck |
|---|---|
| Model | Graphite |
| Category | Vacuum Cleaner |
| Language | English |
Essential safety precautions and warnings for using the vacuum cleaner.
Identifies and numbers the various components of the vacuum cleaner.
Step-by-step instructions for assembling the vacuum cleaner's handle.
Guidance on how to properly use the vacuum cleaner for effective cleaning.
Instructions for safely removing and replacing the vacuum cleaner's dust bag.
Advice for optimal performance and basic maintenance during operation.
Explains the function and importance of HEPA bags for vacuum efficiency.
Details the role of the drive belt and its impact on brushroll operation.
Information regarding the lubrication of the vacuum cleaner's motor bearings.
Step-by-step guide for replacing the vacuum cleaner's drive belt.
Instructions for adjusting or replacing the brushroll for optimal cleaning.
Guide on how to replace the edge brushes on the vacuum cleaner.
Troubleshooting steps for common blockages in the vacuum cleaner.
List of optional accessories available for purchase.
List of common replacement parts available for the vacuum cleaner.
Details the terms, duration, and limitations of the manufacturer's warranty.
To Next Page