3. OPERATION
ATTACHING TOOLS
Place unit in upright position. Slide the hose on the tool’s connector until it locks. Push
forward with your thumb on the latch to remove.
NOT TO BE USED FOR GROOMING A PET. TO REDUCE RISK OF INJURY FROM MOVING
PARTS – UNPLUG BEFORE SERVICING.
USE EXTRA CARE WHEN CLEANING ON STAIRS. TO AVOID PERSONAL INJURY OR DAMAGE, AND TO
PREVENT THE CLEANER FROM FALLING, ALWAYS PLACE CLEANER AT BOTTOM OF STAIRS OR ON FLOOR.
DO NOT PLACE CLEANER ON STAIRS OR FURNITURE, AS IT MAY RESULT IN INJURY OR DAMAGE. WHEN
USING TOOLS, ALWAYS ENSURE HANDLE IS IN UPRIGHT POSITION.
WARNING! WARNING! WARNING!
NOTE: Tools are located and stored in Mesh Stoage Bag.
NOTE: Upholstery and SpinBrush 360
™
Powered Hand Tool attach to the hose in the same manner.
To Next Page
Loading...
Need help?
General
