4. MAINTENENCE
CLEANING THE DIRTY WATER TANK
Remove the Dirty Water Tank by squeezing
latch and pulling the tank out at an angle.
Pull up on back latch to open Dirty Water Tank.
Hold top open and rinse tank with clean water.
TO REDUCE THE RISK OF PERSONAL INJURY—UNPLUG
BEFORE CLEANING OR SERVICING.
LUBRICATION: THE MOTOR AND BRUSHROLL IS EQUIPPED WITH BEARINGS WHICH CONTAIN SUFFICIENT LUBRICATION
FOR THEIR LIFETIME. THE ADDITION OF LUBRICANT COULD CAUSE DAMAGE. DO NOT ADD LUBRICANT TO MOTOR OR BRUSHROLL.
WARNING!
To clean Dirty Water Tank, place it under
faucet and dispense high pressure clean
water to backflush any loose debris.
To Next Page
Loading...
