To Next PageTo Next Page
Need help?Do you have a question about the Oreck XL3910H2B and is the answer not in the manual?
General| Type | Upright |
|---|---|
| Model | XL3910H2B |
| Filtration | HEPA |
| Power Source | Corded Electric |
| Voltage | 120V |
| Cord Length | 30 ft |
| Cleaning Path Width | 12 inches |
Check bag installation, lower tube, baseplate inlet, and fan housing for clogs or cracks.
Inspect lower tube and baseplate for clogs, ensure bag is fitted correctly, and check belt installation.
Check belt age and installation, or worn brush roll bearings, replace as needed.
Ensure plug fits firmly into the handle for non-hardwire units.
Verify power connection, switch function, motor brush contact, and cord integrity.
Check wheel attachment and ensure baseplate components like channel or blade are secure.
Inspect brush roll bearings, check for obstructions in fan housing, and verify fan blades.
Check for a broken or missing detent mechanism.
