VIEW CURRENT READINGS
You can directly view all the weather readings from
different sensors through the application at a time. The
readings are in HOME screen.
NOTE
If low battery icon displays on the screen,
please replace the batteries for the corresponding device.
To show unavailable sensor:
If the sensor is out of range, the readings are
interrupted and
￣
(dash mode) displays on the screen.
If you do not want to show the unavailable sensor:
• On SETTINGS screen, touch and slide the button to
right to turn on the function, or sliding to left to turn it off.
To automatically synchronize time:
Time and date on your weather station could be
automatically synchronized by your mobile device.
• On SETTINGS screen, touch and slide the button to right
to turn on the function, or sliding to left to turn it off.
To show sea level pressure:
After the altitude is input,
you can view the sea level
pressure on the HOME
screen.
• On SETTINGS screen,
touch and slide the
button to right to turn on the function, or sliding to
left to turn it off.
NOTE
When altitude is set to 0 meter, the pressure
reading is the local pressure. If the altitude is set to
the current location, the new pressure reading will be
displayed as a sea level pressure.
VIEW HISTORY READINGS
You can view history through the application. The
history could also be presented in graphs (past 24
hours or past 7 days).
BAR218HGX-UM-EN-R14.indd 9 2019/2/14 下午12:19
To Next Page
Loading...
Need help?
General
