6
To select an outdoor sensor’s readings:
• Toggle to select your desired sensor reading.
To auto-scan among sensors:
• Press and hold and MEM at a time to display
each sensor’s data for 3 seconds.
• To end, press .
To display current, minimum and maximum
records of the day from a selected sensor:
• Toggle MEM.
To clear the records:
• Press and hold MEM.
ICE WARNING
If the channel 1 sensor falls from 37°F to 28°F (3°C to
-2°C), LED indicator will ash, and will stop ashing
once the temperature is out of this range.
• Press and at the same time to disable the ice
alert warning.
As ice alert is only applicable to channel 1,
to prevent ashing of LED, select channel 2 or 3 on
outdoor sensor.
WEATHER TRENDS
The temperature, humidity and pressure trend icons
are based on recent sensor readings.
RISE
STEADY FALL
MOON PHASE
In moon phase mode, press or to scan through
the years (2001 to 2099).
New moon Full moon
Waxing crescent Waning gibbous
First quarter Third quarter
Waxing gibbous Waning crescent
Star icons around the moon phase will be
displayed from 6 o’clock in the evening to 6 o’clock the
next morning.
BACKLIGHT
Press LIGHT to activate backlight for 5 seconds.
RESET
Press RESET to return to the default settings.
BAR218HGX-UM-EN-R14.indd 6 2019/2/14 下午12:19
To Next Page
Loading...
Need help?
General
