Oregon Scientific DS6688 - Metering and Exposure Settings; Metering Modes; ISO Sensitivity; Exposure Compensation (EV)

DS6688 Manual-Eng,Fre,Ger (086-003403-012)
EN
FR
DE
ITESPORNLSWE
EN
FR
DE
ITESPORNLSWE
1817
METERING
Metering is a setting that determines your
subject's correct exposure. The camera will
compute the brightness levels, contrast, and
amount of bright to dark parts in the scene
automatically.
ICONS SETTINGS OPTIONS
Matrix Evaluated by splitting the scene into multiple zones,
(multi- then calculate each zone's exposure via the camera's
segment) computations. Ideal for general picture-taking.
Central Averages the exposure of the entire scene but
(Centre- gives extra weight to the centre. Use for backlit
weighted) subjects (default setting).
Spot Only the small area at the centre of the screen
determines the exposure. Ideal for highlighting
the main subject.
ISO
The ISO setting affects the camera's sensitivity
to light.
NOTE: An image taken at higher ISO speeds
may contain more "noise" or graininess than an
image taken at lower speeds.
SPEED DESCRIPTION
The camera sets the speed automatically (default setting)
ISO rating 50. Use for very brightly lit scenes
ISO rating 100. Use for brightly lit scenes
ISO rating 200. Use for normally lit scenes
2/2
Exit
OK
MENU
AUTO
Off
0.0
Setup
Metering
ISO
Con.Shoot
EV
Record
2/2
Exit
OK
MENU
AUTO
Off
0.0
Setup
Metering
ISO
Con.Shoot
EV
Record
EV (EXPOSURE COMPENSATION SETTING)
Exposure compensation is required when there
is an extreme difference in brightness between
the background and the subject. Use this setting
to manually brighten or darken an image.
Default setting is 0.0.
EV +2.0 / + 1.7 / +1.3 / +1.0 / +0.7 / +0.3 / 0.0 / -0.3/ -0.7 /-1.0 /
-1.3 / -1.7 / -2.0
SHOOTING MOVIES
The Movie Mode enables you to take movies. The length of the movie
that can be taken depends on the amount of memory available within
your camera's current memory storage.
FUNCTION DESCRIPTION
Toggling OSD Information Identical procedures to Camera Modes
Zooming Identical procedures to Camera Modes
Begin Recording Movie Press the Shutter Release Button
Stop Recording Movie Press the Shutter Release Button again
after recording has started.
Movie Mode ( p.20)
Total Available Time for Recording
Current Elapsed
Recording Time
(in hh:mm:ss)
ISO ( p.18)
White Balance
( p.17)
Zoom Level ( p.9)
Focus Switch
Setting ( p.4)
Current Time ( p.11)
EV ( p.19)
Battery Level
Indicator ( p.6)
Memory Type ( p.5)
Current Date ( p.11)
All manuals and user guides at all-guides.com