DS6688 Manual-Eng,Fre,Ger (086-003403-012)
EN
FR
DE
ITESPORNLSWE
EN
FR
DE
ITESPORNLSWE
2423
PROTECTING IMAGES AND MOVIES
To protect / unprotect selected images and movies
from accidental deletion:
1. When "Select Images" is selected, the OSD
displays up to nine thumbnail images similar
to the Multi-Frame Review setting. Use
to navigate.
2. Highlight an image, then press directly onto
to confirm your selection. The icon will
then appear to indicate that the image is set
for protection.
3. To cancel the protection, press directly onto again.
4. Repeat Step 2 to set multiple images or movies for protection.
5. Follow the rest of the on-screen options to confirm protection.
To protect / unprotect all images and movies from accidental deletion:
1. When "All Images" is selected, select the "Set Protect All" to On to
confirm the protection of all images and movies.
2. To unprotect all images and movies, select the "Set Protect All" to Off.
SPECIFYING DIGITAL PRINT ORDER FORMAT (DPOF)
The DPOF option in the Playback Menu is used
to specify the quantity of each image for printing
from the SD Card. When used, the SD card can
then be used in printers or taken to specialists
in order to print the images.
NOTE: This function is only used for still images. Movies cannot be
transferred to digital prints.
NOTE: You can only specify the DPOF of the internal memory by
transferring the images to a blank SD /MMC card via an SD card /
MMC reader (sold separately).
1/1
Exit
OK
MENU
Setup
Delete
Protect
DPOF
Slide
Play
1/1
Exit
OK
MENU
Setup
Delete
Protect
DPOF
Slide
Play
To specify DPOF of selected images:
1. When "Select Images" is selected, the OSD displays up to nine
thumbnail images similar to the Multi-Frame Review setting. Use
to navigate.
2. Highlight an image, then press directly onto to confirm your selection.
3. Press or to set the number of prints for the selected image (up
to a maximum of 9 for the selected image (up to a maximum of 9
copies). When done, press directly onto once again.
4. Repeat Step 2 to select more images for printing or change the
previously specified numbers.
5. Press directly onto and follow the rest of the on-screen options
to confirm the DPOF setting.
To specify DPOF of all images:
1. When "All Images" is selected, all images will be set to the same
specified printing number.
2. Press or to set the number of prints of all stored images in the
SD card, for up to a maximum of 9 copies.
3. Follow the rest of the options to confirm the DPOF setting.
SLIDESHOW
You can play back all images and movies in a slideshow format. The
interval between images can be specified. During the slideshow, press
MENU to stop. From here, you may choose to continue or exit the
current slideshow.
SETTINGS DESCRIPTIONS
Start Start Slideshow according to the specified Interval and
Repeat options.
Interval Specifies the amount of time the camera will display an
image before moving on to the next image. The options
are 3 sec., 5 sec., and 10 sec.
Repeat When set to On, the slideshow immediately replays
when the final image is displayed.
To Next Page
Loading...
