5
SPECIFICATIONS
Specifications
Oregon 480RT Rotary Tiller Oregon 600RT Rotary Tiller Oregon 720RT Rotary Tiller
Manufacturer material number OR48RT-1 OR60RT-1 OR72RT-1
Tilling Width 47" 59" 71"
Maximum Tilling Depth 7" 7" 7"
Operating Weight 502 lbs/507 lbs 570 lbs/578 lbs 628 lbs/636 lbs
Rotor Swing Diameter 15" 15" 15"
Number of Blade Flanges 6 7 9
Number of Blades 24 28 36
Drive Type Gear Gear Gear
Tractor PTO Speed 540 RPM 540 RPM 540 RPM
Rotor Speed 210 RPM 210 RPM 210 RPM
Tractor Hitch Limited Category 1 & Category 1 Category 1 Category 1
Tractor PTO Horsepower 15 - 35 HP 18 - 40 HP 20 - 50 HP
Skid Shoe Adjustments 5 x 1" 5 x 1" 5 x 1"
Offset 3" 2.3" 2.3"
Gearbox Oil Capacity 1.2 Qt SAE 80W-90 1.2 Qt SAE 80W-90 1.2 Qt SAE 80W-90
Side Drive Oil Capacity 3 QT SAE 80W-90 3 QT SAE 80W-90 3 QT SAE 80W-90
General Information
WARNING
Some illustrations in this manual show the equipment with safety shields removed to provide a better view. This
equipment should never be operated with any necessary safety shielding removed.
The purpose of this manual is to assist you in operating and maintaining your 3-point equipment. Read it carefully. It furnishes
information and instructions that will help you achieve years of dependable performance. These instructions have been
compiled from extensive field experience and engineering data. Some information may be general in nature due to unknown
and varying operating conditions. However, through experience and these instructions, you should be able to develop
procedures suitable to your particular situation.
The illustrations and data used in this manual were current at the time of printing but, due to possible inline production
changes, your machine may vary slightly in detail. We reserve the right to redesign and change the machines as may be
necessary without notification.
Throughout this manual, references are made to right and left directions. These are determined by standing behind the
equipment, facing the direction of the forward travel.
To Next Page
Loading...