Page
37
RS-232
Control Command
Command Code Function Description Example Feedback Default
CEC Setting
s cec in x vol-!
Set input x volume down by
CEC, x=0~4 (0=all input)
s cec in 1
vol-!
input 1 volume
down
s cec in x vol+!
Set input x volume up by CEC,
x=0~4 (0=all input)
s cec in 1
vol+!
input 1 volume
up
s cec in x ff!
Set input x fast forward by CEC,
x=0~4 (0=all input)
s cec in 1 ff!
input 1 fast
forward operation
s cec in x
previous!
Set input x previous by CEC,
x=0~4 (0=all input)
s cec in 1
previous!
input 1 previous
operation
s cec in x next!
Set input x next by CEC, x=0~4
(0=all input)
s cec in 1
next!
input 1 next
operation
s cec hdmi out
y on!
Set hdmi output y power on by
CEC, y=0~4 (0=all hdmi output)
s cec hdmi
out 1 on!
hdmi output 1
power on
s cec hdmi out
y off!
Set hdmi output y power off by
CEC, y=0~4 (0=all hdmi output)
s cec hdmi
out 1 off!
hdmi output 1
power off
s cec hdmi out
y mute!
Set hdmi output y volume
mute by CEC, y=0~4 (0=all hdmi
output)
s cec hdmi
out 1 mute!
hdmi output 1
volume mute
s cec hdmi out
y vol-!
Set hdmi output y volume
down by CEC, y=0~4 (0=all hdmi
output)
s cec hdmi
out 1 vol-!
hdmi output 1
volume down
s cec hdmi out
y vol+!
Set hdmi output y volume
up by CEC, y=0~4 (0=all hdmi
output)
s cec hdmi
out 1 vol+!
hdmi output 1
volume up
s cec hdmi out
y active!
Set hdmi output y active source
by CEC, y=0~4 (0=all hdmi
output)
s cec hdmi
out 1 active!
hdmi output 1
active source
Network Setting
r ipconfig!
Get the Current IP
Configuration
r ipconfig !
IP Mode: Static
IP: 192.168.0.100
Subnet Mask:
255.255.255.0
Gateway:
192.168.0.1
TCP/IP port:8000
Telnet port:23
Mac address:
00:1C:91:03:80:01