Orei BK-404 - Page 39

Page
39
RS-232
Control Command
Command Code Function Description Example Feedback Default
Network Setting
r tcp/ip port!
Get network TCP/IP
port
r tcp/ip port! TCP/IP port:8000
s telnet port x!
Set network telnet
port (x=1~65535)
s telnet port
23!
Set Telnet port:23
r telnet port!
Get network telnet
port
r telnet port! Telnet port:23
s net reboot!
Reboot network
modules
s network
reboot!
Network reboot…
IP Mode: Static
IP: 192.168.0.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
TCP/IP port=8000
Telnet port=23
Mac address:
00:1C:91:03:80:01