Oricom Secure740 User Manual

31
troUBLeShootIng
High pitched
noise from
parent unit -
Feedback
− Increase the distance between
the parent unit and baby unit.
Reduce the volume on the
parent unit.
Picture but no
sound
− Increase the volume on the
parent unit.
Picture is in
black and white
− Night function is active.
Increase the light level in the
baby’s room if required.
Picture on
parent unit
not displaying
correctly
− Switch off parent unit then
camera unit. Wait 10 seconds.
Switch on the camera unit then
parent unit (in that order).
Battery not
charging
− Check the battery is connected
to the battery connection in the
battery compartment.
− After a period of time, the
battery may need to be replaced
due to everyday usage. Please
visit www.oricom.com.au to
purchase replacement batteries.
Parent unit
beeping
Move the parent unit closer
to the baby unit until they are
within range.
No picture after
10 seconds
VOX function is activated. Turn
off VOX if required.
Picture changes
every 10
seconds
Scan function is on. Turn off the
scan function.
troUBLeShootIng
OR017650 - SC740 User Guide_05-10-19.indd 31 2019/5/10 13:05:42

Oricom Secure740 Specifications

General

Brand	Oricom
Model	Secure740
Category	Baby Monitor
Language	English