Oricom UHF5500 User Manual

16
Instant channel
The Transceiver has 3 instant channel recall and memory function.
Instant recall
1. Press the Instant button, The letters “MR INST” will be appear on
the LCD.
The 3 instant channels are pre programmed as bellow.
Button A B C
Default CH 40 20 1
2. You can recall each instant channel by press one of buttons after
recall mode.
If you want escape from this function press INS button or press
PTT.
Instant Channel memory change
To change the pre programmed INS CH
Instant Channel scanning
Operations
1. Select the required channel.
2. Press and hold the instant button until "MW INST" appears on the
LCD.
3. Press the INS CH button that you want to change the new channel
information will be saved
1. Press SCAN button to start scanning.
2. Press and hold 2 seconds scan button again. Then scanning will be
changed to 3 INS CH scanning mode.
3. When you want to stop scanning, you can press SCAN button or
push the PTT button.

Oricom UHF5500 Specifications

General

Brand	Oricom
Model	UHF5500
Category	Radio
Language	English