17
Duplex
Duplex can be turned off and on for each channel in Menu mode. The
Display shows DPX Only available on channels (1-8) and (41-48).
General
Your radio has a Repeator Access function to allow use of local
repeator stations (if available in your area). Repeators are shared radio
system installed by interested parties(clubs,local business etc.) that
pick transmissions on specic channels and re-transmit(or repeat) the
received signal to another channel.
The Repeator Access function can be set (from channel 1 to 8 and
41 - 48) used by local repeater stations. When activated, your radio
will receive the Repeator on its specic channel (all repeater output are
on channel 1 to 8 and 41-48) but transmit to the repeater channel 31
through 38 and 71 to 78.
e.g
CH01 on Duplex mode will receive on CH01 but transmit on CH31.
CH02 on duplex mode will receive on CH02 but transmit on CH32.
If you transmit on CH01 duplex mode, you are actually transmitting on
CH31.
The repeater station down converts your signal and retransmits on
CH01.
Your UHF5500 allows you to pre-select Duplex operation individually on
each channel.
Channel
2
Channel
32
C
h
a
n
n
e
l
2
Channel 32
Repeater Station
Operations
To Next Page
Loading...
Need help?
General
