Oricom UHF5500 - Accessing Menu Functions

19
The following features can be selected by using the “MENU” button:
1. Digital Squelch setting (15 levels)
2. Selection of the required CTCSS or DCS code or no code (of) for the
current channel
3. Open Scan, Priority Scan and Instant Channel Scan
4. TX power Hi/Lo
5. Vox Sensitivity (15 levels)
6. Vox release TX delay time
7. Priority channel memory
8. Duplex on/off
9. Key beep tone
10. Roger beep tone
11. Power save
12. Busy channel lock
13. Squelch Tail
14. Scan channel memory On/Off
15. 5 Selectable call tones
16. Squelch delay time
17. Scan resume time control (5,10,15,P5)
18. Key lock On/Off
19. Software version display
Operations
To access the Menu functions.
1. Press and hold the Menu button, the rst menu function is
displayed.
2. Briey press the menu button to cycle through each available
function.
After the last function has been selected, the cycle returns to the
beginning.
3. Use the channel up or down buttons to change the parameters of
the selected function.
4. To exit the menu, press PTT button or press and hold the menu
button for 2 seconds.