Regulations and standards
50
Example of installation and wiring
Connection cable∗1
AC power supply
L
N
PE
Power supply cable
[2 m (6.6 ft.)]
External
Ground plate (aluminum plate)
I/O signals cable
[2 m (6.6 ft.)]
External potentiometer
cable [2 m (6.6 ft.)]
Grounding
Regeneration unit lead wire
∗2
[0.3 m (0.98 ft.)]
Regeneration unit
RGB100
Mains
lter
Grounding
*1
The connection cables for up to 20.5 m (67.2 ft.) have been evaluated.
*2
Non-shielded cable
Precautions about static electricity
Static electricity may cause damage to the driver.
Be sure to ground the product in order to prevent electric shock or product damage by static electricity.
Except when operating the operation panel on the driver, do not approach or touch the driver while the power is on.
To Next Page
Loading...
