Oriental motor BLHM230K Series - Motor Rotation Direction Configuration

19
Operation
7.5 Rotation direction of the motor output shaft
The rotation direction of the motor output shaft represents the direction when
viewed from the motor output shaft.
The motor rotation direction can be changed using the
MEXE02
.
The gure shows when the "Motor rotation direction" parameter is set to "+=CW."
FWD input signal
(CW)
REV input signal
(CCW)
Rotation direction of the gearhead output shaft
The rotation direction of the gearhead output shaft varies depending on the type or the gear ratio of the gearhead.
Check the operating manual supplied with the motor for the rotation direction of the gearhead output shaft.