13
Channel selection
With the numbered buttons.
Example:
No. 2: Press 0 and within 2 seconds, press 2.
No. 29: Press 2 and within 2 seconds, press 9.
No. 929: Press 9, 2, 9 same as above.
Press P + or – to change up or down a channel. This
takes approx. 2 seconds. If the auto search only stored
5 stations, only these 5 will appear. Skipped channels
will not appear (see P.12).
Channel List
The Channel List shows a list of all receivable
programmes.
Press CH LIST to display the Channel List.
Press or to select the desired channel.
Press CH LIST to display the selected channel.
If you press CH LIST again, the Channel Details will
appear.
Information display
Press
. The program information will appear for
approx. 4 seconds.
The following figure is an example of DVB-channel
reception.
•
•
•
•
Basic Operation
ARTE
3_ARTE_Monosco_0820_0000_0030_ABCDEFGHI
2:00 - 2:30
Age : 4
2:30 - 3:30
3_ARTE_Monosco_0820_0000_0030_Audio6_ABCDEFGHIJKLMNOPQRSTUVWXYZab
cdefghijklmnopqrstuvwxyz_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs 1/2
tuvwxyz_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_ABCDEFG
1/6 English Stereo
576i SD
English
3_AR
TE_Monosco_0820_0030_0130
STTLTTX
1
1235 6 8 9
10
11
15
13
14
12
47
QuickView
button allows you to go back to the last selected
TV channel.
Even in external input mode, it will go back to the
last selected TV channel.
MUTE
Press
. The sound will be cut off.
The muting can be released by pressing
again or
+ or –.
Still picture
Press FREEZE to make a still picture. To cancel the
still picture, press FREEZE again.
Note:
The still picture function is available only for ATV/DTV-
input mode.
During still picture mode, PICTURE SIZE feature is not
available. (still picture mode will be canceled)
Note:
If the built-in tuner does not receive anything (e.g. if no
antenna is connected) during TV-operation, then the TV-
unit will change to standby after approx. 15 minutes.
•
•
•
•
1. Channel Name
2. Lock status
3. DVB Teletext available
4. DVB Subtitle available
5. Subtitle Language
6. Audio Language
7. Audio Format
8. Video Format
Note:
If the current watching DVB-channel has more
than one audio language or subtitle language,
you can change them by each pressing of
AUDIO I/II or
.
When a DVB-channel with HE-AAC audio is
selected, the sound will be output as PCM audio
from DIGITAL AUDIO COAXIAL output jack.
Some DVB-broadcasts may not provide subtitle
language service.
•
•
•
9. Channel Number
10.
There are more than 2 pages.
11. Program Detail
12. Next Program Duration
13. Parental Rating
14. Program Duration
15. Program Title
Auto Synchronization
This feature can display the time based on the
DVB signal information.
If you wish to set the time manually, select
“Off” as follows and then perform the Date and
Time options.
1
Select /Time Setup/Time/Auto
Synchronization.
2
Then press or to select Off.
3
Press
to select Date, then enter the date
with 0-9 buttons.
Auto Synch
ronization
Date
Time
Of
f
2010/10/
21
01:01:39
Timer
Power On Timer
Power Off Timer
O
ff
00:00:00
00:00:00
4
Then press
. Enter the Time same as above.
5
Press MENU to exit the menu.
Teletext
Teletext is sent page by page. This unit is able to
automatically store up to 1000 pages, but they can
only be accessed once they have been stored. This
can take a few moments.
The TELETEXT menu allows the installation of
the teletext language.
The languages displayed are only those
supported by the channel. In Germany this is
usually GERMAN.
Fastext/TOPtext
The Fastext/TOPtext is teletext with a special
directory.
On the lower part of the screen there are four
different coloured fields (red, green, yellow and
blue). These fields lead directly to the pages
shown within. The coloured buttons on the remote
control correspond to the coloured fields. Press the
appropriate coloured button in order to activate the
desired colour field.
3BR2901A_EN.indd 133BR2901A_EN.indd 13 3/8/11 12:14:16 PM3/8/11 12:14:16 PM
To Next Page
Loading...
Need help?
General
