Orion 425 HCCA - ORION 250 HCCA; DESCRIPTION; SPECIFICATIONS

ORION 250HCCA
High Current Stereo Power Amplifier
100 Watts RMS
amplifier
EQUIPMENT SUPPLIED
POWER LEAD
POWER
CABLE ASSY
POWER ON
LED '
LEFT INPUT __ ^
rca connector - v
CONNECTOR ‘ fi| 4
(In parallei with * i ■
RCA connections, i
includes Phantom / t >
Power output) RIGHT INPUT / ijff
CONNECTOR /
GAIN CONTROL
DESCRIPTION
The ORION 250 HCCA is an excellent choice for
easy listening systems where you want full range
with smooth highs and rich, tight bass. The amplifier
is also ideal for handling tweeters and mid-range
speakers in competition systems. Because of the high
current output and low impedance characteristics, it
is the answer to adding additional speakers in parallel.
The 250 HCCA provides 50 watts RMS of distor¬
tion-free power per channel or 400 watts at 2 ohms
when bridged using the ORION Bridging Module
400 BDG (see page 6).
CHASSIS
GROUND
TERMINAL
MOUNTING
HARDWARE
40 AMP FUSE
BUTT SPLICE
BATTERY
CONNECTION
LUG
FUSEHOLDER
TURN-ON CONNECTION
WIRE (BLUE)
SPEAKER
CONNECTIONS
CABLE ASSY
Output Power Per Channel
with both channels driven
into 4 ohms @ 12 Vdc. 50WRMS
Distortion:
Typical. 0.005%
Maximum.0.03%
SPECIFICATIONS ^ r
I Input Impedance . 10K ohms
Remote Turn-on Current.50 mA
Current Consumption:
@ No Signal. 600 mA
@ Maximum Output.50 Amps
Voltage Requirements.10V to 16V
Frequency Response . 6 Hz to 50 KHz + 0 .5 dB Damping Factor . G r eater than 500
Signal to Noise Ratio . 112 dB Output Section Slew Rate . . . 30V per microsecond
Input Sensitivity.150 mV to 2 Vrms Stereo Separation.80 dB
Output Impedance . 1 ohm to 16 ohms Overall Dimensions. 17 x 8.5 x 2.25 inches