8.1 PAIRING YOUR DEVICE
Enter the Wi-Fi password
and tap
confirm
to proceed.
If needed, you can tap
change network
to switch
to another suitable Wi-Fi
network for your doorbell.
Make sure that your
Wi-Fi password is correct
otherwise pairing will not
be successful. Be aware of
case-sensitive passwords.
confirm
scan
QR
code
on screen
Press
continue
to scan QR code using
your doorbell. Hold the product 15cm
away from your mobile screen.
Press
heard the beep
after you hear a
sound from your doorbell. The status light
should change from flashing red to solid
blue during this process.
98
24 pages 105mm x 148mm (A6) 160gsm Gloss Art Stock 4 colour process double sidedDC55HA Series 2 - CPIN005156/4
To Next Page
Loading...
Need help?
General
