Need help?Do you have a question about the Orion DC55HA 2 Series and is the answer not in the manual?
General| Brand | Orion |
|---|---|
| Model | DC55HA 2 Series |
| Category | Accessories |
| Language | English |
1080p HD camera with 140° angle of view.
Used to reset the device; refer to reset process on page 19.
For two-way audio communication.
Detects low light and activates infrared for day/night vision.
Provides two-way audio.
Indicates device status like resetting, pairing, or Wi-Fi connection.
Press to activate the doorbell.
Remove before use to establish electrical contact.
Shows charging status: Red for charging, Blue for fully charged.
Supports rolling storage, 16GB card included (max 128GB).
Houses the rechargeable batteries.
Used for securing the doorbell to the mount.
For powering the device with a cable and DC adaptor.
Paired unit; refer to page 14 if no sound.
Instructions for downloading the Grid Connect app and creating an account.
Steps for new users to create an account and complete setup.
Instructions for existing users to log into their account.
Instructions for removing the isolation strip and reinstalling the battery cover.
Guide to starting the pairing process by confirming the status light.
Procedure to reset the doorbell if it's not in pairing mode.
Selecting 'Security' and then 'add device' from the app menu.
Inputting the Wi-Fi password, noting 2.4GHz network support.
Hold the doorbell camera 15-20cm from the phone displaying the QR code.
Process of finding, registering, and initializing the device to the cloud.
Confirmation of successful pairing; option to name and assign the device.
Checks for common issues like Wi-Fi network, password, and pairing mode.
Features of the live view, including video quality and PIR mode.
Functionality for viewing recorded footage, including time slider.
Controls for capturing media, talk function, motion detection, and accessing settings.
Steps to power the indoor chime and test its connection with the doorbell.
Procedure to reset the chime unit and re-pair it with the doorbell.
Guidance on choosing an installation spot with good Wi-Fi coverage.
Instructions for charging the doorbell using the USB cable and adapter.
Steps for mounting the bracket and securing the doorbell.
Important notes regarding network requirements and potential delays.
Troubleshooting steps for failed pairing with the GRID Connect device.
How to identify if your network is 2.4GHz for iPhone and Android users.
Procedure to reset your GRID Connect app account password.
Recommendations on device and phone proximity to the Wi-Fi router during pairing.
Steps to put the doorbell into pairing mode using the reset button.
Troubleshooting for scanning QR codes or not hearing the expected beep.
To Next Page