The internal analog to digital converter uses dual 18 bit resolution bitstream auto calibration digital-to-analog
converters made by Phillips. It has 192 times oversampling and features low harmonic distortion, no crossover
distortion and digital de-emphasis for smooth highs and controlled low frequency response. The 18 bit wide
dynamic range D/A converter is coupled with an ultra quiet pre-amplifier stage to deliver over 4 volts per phase (8
volts balanced) to either RCA or Balanced (mini-XLR™). Think of the DEQ 30 as a high performance digital to
analog converter with a built-in 30 band equalizer!
Digital outputs incorporate a professional grade SPDIF transmitter that supports both TOSLINK and COAX
digital connections. This allows for an outboard digital-to-analog converter or more digital processing.
You can choose any and all of the analog digital outputs depending on your systems needs. Make sure to
make connections while the DEQ 30 is not powered on. Failure to do so may result in damage to your
speaker system.
OFF-SCREEN RESPONSE PROBLEMS
17
36
To Next Page
Loading...
