Machine Manual Orion
Flex Stretchwrapper Revision 3.0
System Operation 15 February 2016
Page 3-14
Press this button to jog the carriage downwards. The carriage move slowly down-
wards until the operator releases the jog button.
Press this button to toggle through the film clamp stages.
Press this button to manually trigger the brush and cut sequence.
Press this button to reset faults. If you press this button while the machine is run-
ning, the machine will abort the current wrap cycle.
Table 3-8. The Jogging Screen Button Descriptions (Continued)
STATE 1 DESCRIPTION
To Next Page
Loading...
