Orion FLEX LPA User Manual

Orion Machine Manual
Revision 3.0 Flex Stretchwrapper
15 February 2016 System Operation
Page 3-29
Factory Defaults Screen
This is the Factory Defaults Screen. This screen allows authorized users to go back to the
factory default settings.
Figure 3 - 20
The Factory Defaults
Screen
Table 3-19. The Factory Defaults Screen Button Descriptions
STATE 1 DESCRIPTION
RESTORE FACTORY
DEFAULTS
Press this button to delete the currently entered factory settings and replace them
with the original factory default settings. This will replace all Wrap Settings,
Machine Settings, and Recipes with the factory default parameters.
RESTORE DEFAULT
NETWORK SETTINGS
Press this button to restore default network settings to the machine.

Orion FLEX LPA Specifications

General

Brand	Orion
Model	FLEX LPA
Category	Stretch Wrapping Systems
Language	English