Orion FLEX LPA User Manual

Orion Machine Manual
Revision 3.0 Flex Stretchwrapper
15 February 2016 System Operation
Page 3-33
INSTA-CUT SPEED HZ
Press this button to modify the Insta-Cut Speed. This is the speed at which the Main
Drive will travel during the Insta-Cut sequence. Min - 8 Hz Max - 27 Hz
This indicator will glow green when the Insta-Cut puncher is active.
Table 3-22. The Insta-Cut Screen Button Descriptions (Continued)
STATE 1 DESCRIPTION STATE 2

Orion FLEX LPA Specifications

General

Brand	Orion
Model	FLEX LPA
Category	Stretch Wrapping Systems
Language	English