Orion Flex - User Manual

Bulletin #: V012116-01
Issue Date: January 21, 2015
Orion Packaging Systems * A division of Pro Mach
4750 County Road 13 NE Alexandria, MN 56308
(800) 333-6556
http://www.orionpackaging.com/landing/flex-manual-download/
Page 1 of 9
Quick Start Guide
Thank You for Purchasing an Orion Flex Stretch Wrapper!
Your new FLEX stretchwrapper was designed to get up and running quickly upon
delivery. This guide will help you begin using your machine effectively by providing step
by step instructions in the basic operations of the machine. More advanced capabilities
are described in the manual. For your convenience, there is an
interactive on-screen troubleshooting guide under the Diagnostics
screen. You can download the complete manual, electrical prints,
and mechanical drawings at this location:
http://www.orionpackaging.com/landing/flex-manual-download/
Unpacking
 Remove skidding/ packaging materials.
 Please inspect the machine for any fasteners that may have loosened in
shipping. Although this is highly unlikely, long delivery distances may have an
effect on fastener torque.
 Inspect for any obvious shipping damage and report to your machine provider.
(HPA, HPD, LPA, LPD) Carriage Obstacle Detect Error
Recovery
 When the obstacle detect error occurs, the brake must be released.
 To release the brake, pull outward on the carriage strap on the front side of the
tower until the brake releases.
 Align the limit switch on the inside of the tower with the center of the strap.

Summary

Unpacking and Initial Inspection

Carriage Obstacle Detect Error Recovery

Positioning the Stretch Wrapper

Connecting Power

Power Up and Boot Up Procedure

Jogging the Machine

Setting Up the Load

Loading the Film Roll

Running a Test Load

Adjusting Wrap Settings

Top and Bottom Wraps Adjustment

Set the number of top and bottom wraps applied to the load, with parameters from 1-20.

Carriage Speed Adjustment

Adjust carriage speed for upward and downward movement as a percentage (5%-100%) for film overlap.

Wrap Recipes Management

Selecting and Naming Wrap Recipes

Save up to ten wrap recipes with custom names for different load types and easily select them.

Viewing and Editing Recipes

Recipe Parameter Review

View and edit parameters for each saved recipe using navigation and keypad input.

Reinforce Wraps Configuration

Orion Flex Specifications

General

Brand	Orion
Model	Flex
Category	Packaging equipment
Language	English