SYSTEM PLANNING SYSTEM 4
System 4 uses a 4-channel amplifier to power the front satellites and a single 4Ω subwoofer and a 2-channel amplifier for the rear satellites.
Amplifier 1
• Lowest recommended impedance for the front channels is 2Ω per channel
• Front channels configured for high-pass operation
• Front channels configured for stereo operation
• Lowest recommended impedance for the rear channels is 2Ω
• Rear channels configured for low-pass operation
• Rear channels configured for summed stereo operation
• Amplifier is configured for 2-channel input
Amplifier 2
• Lowest recommended impedance is 2Ω per channel
• Amplifier is configured for high-pass or full range operation
• Amplifier configured for stereo operation
• Amplifier input received from the rear RCAs of Amplifier 1
page 15
To Next Page
Loading...
